Last October, Apple launched the AirPods Pro with an updated design and new technology such as noise cancellation, and it came in sizes that match the curves of the ear, this is not comfortable and tight in installation as it is equipped with flexible silicone heads, and it relies on an innovative ventilation system to equalize pressure, and has sweat resistance. And water. In this article, we'll give you 2019 tips on using the AirPods Pro‌ to help you get the most out of it.

Tips for using AirPods Pro


Take your AirPods Pro‌ out of the box the correct way

You may face some difficulties in removing the speaker from the box, so Apple designed a method that makes you simply press the back of each speaker, and it will come out directly with you with ease.


Enable noise cancellation to improve the sound

‌AirPods Pro‌ came with support for Active Noise Canceling (ANC), which blocks the sounds of the outside world so you can focus on what you are listening to. ANC technology is based on a feature called Ambient EQ, which Apple says adjusts the audio signal 200 times per second to improve the sound by using an inward-facing microphone.

And when noise cancellation is off, the Ambient EQ is also disabled, which means the sound quality is degraded a bit. So, to get the best audio experience through your Airpods Pro, it's best to keep the noise canceling feature enabled.

By default, pressing and holding the leg of the AirPods Pro will switch between noise cancellation and transparency mode, or you can control whether or not noise cancellation is turned on through the iPhone or iPad through the Control Center - press and hold the control bar. Volume Two pairs of earphones will appear inside to indicate that the AirPods Pro are connected, tap Noise Canceling in the bar at the bottom of the screen.

You can also control the “Noise Control” functions by going to Settings - Bluetooth and pressing the information icon (the circle "i") next to AirPods Pro‌. And if you are using a Mac with macOS Catalina, you can control it from the volume icon in the menu bar.


Click to see the status of wireless charging

‌AirPods Pro‌ comes with a wireless charging case, and you can charge it on most Qi-compliant external charging pads. And you can know the status of shipment through this box at any time.

● Place the charging case face down on the charging dock - the lamp will be on for a few seconds, then will go off when charging starts.

● To check charging status at any time, tap the charging case with your finger to illuminate the light.

● Note the color of the light: amber light means it is still charging, and green light means that it is fully charged.


Activate noise cancellation on a single AirPod

You can use noise cancellation when using only one AirPod Pro, which is useful if you want to make calls using only one speaker, through settings - Accessibility - AirPods‌ - and then activate Noise Cancellation on One AirPod or cancellation noise on one speaker .


Control noise through Apple Watch

Airpods Pro users are able to control the noise on or off completely from the iPhone Control Center. But many don't know that they can access the same functions on the Apple Watch as well.

Ensure that the Airpods Pro are connected to the iPhone and play an audio clip.

● Raise your wrist to wake up Apple Watch‌.

● On the Now Playing screen, tap the triangle icon with three circles in the lower left or right corner as in the image above.

● Click AirPods Pro‌ in the list.


Use the AirPods Pro‌ as a remote microphone

‌AirPods Pro‌ support the live listening feature, which uses the iPhone as a remote microphone and transfers what is going on around the iPhone to the earphones, even if the AirPods‌ are in another room, and this is useful if you put the phone, for example, next to a university doctor and the headphones in your ears and you will hear Clearly what he says directly.

To activate this feature, go to Settings on the iPhone - Control Center - Customize Control Center Items - then "Hearing" or the ear icon and add it to Control Center. Play through control center and do live listening.


Share audio between two pairs of AirPods

If you are running iOS 13.1 or later, the audio sharing feature allows you to share audio from your device with another pair of AirPods, so that two people can listen to music together while playing or enjoy watching a movie on a plane, for example, without disturbing those around you. To turn on this feature:

● Play an audio or video file on an iPhone or iPad.

● Launch Control Center.

● In the Control Center audio playback shortcut, tap the three-circled triangle icon.

● Bring your friend's AirPods‌ inside the box, near your device, and open the cover.

You should see a prompt on your device's screen that shows "Share Audio" with the second pair of "AirPods."


Use a single AirPod to extend listening time

The AirPods Pro offer excellent stereo sound output, and Apple designed them so that you can use only one of the two headphones, and this does not affect the sound quality too much in addition to prolonging the listening time.

● Place one of the earphones in your ear and leave the other in the charging case, the H1 chip will automatically detect which one is in use.

● When you hear the low battery tone from your earbud, switch it with the other one.

Keep switching between them as long as your charging case has a charge.

Note that when using a single AirPod left or right, stereo signals are automatically converted to mono output.


Adjust the force sensor on your AirPods

If you are having difficulty controlling navigation using the force sensor by pressing the leg of the AirPods Pro, try to adjust the pressure through Settings - Accessibility - AirPods‌ - under the “Press and Hold Duration” tab or press and hold the force sensor, then select Default, Or short, or shorter.


Change the clicking speed on your AirPods‌

The controls on AirPods Pro‌ allow you to press once to play, pause, or answer a phone call, then double-tap to skip forward, then triple-press to skip back.

And if you are having trouble using these functions, you can adjust the click speed to make it slower. And through Settings - Accessibility - AirPods - under the "Press Speed ​​or Press Speed" tab, select Default, Slow, or Slowest.


Find your lost AirPods Pro

If you lose your AirPods Pro or don't remember where they are, you can find their location in the Find My app.

Open the Find My app on an iOS device or access it in any browser via a website iCloud.

● Click the "Devices" tab at the bottom of the screen.

● Tap your Airpods Pro in the list.

● Click Play Sound if you are fairly sure that the speakers are near and can hear them. If you don't know where it is, it will display the last contacted place on the map, click Directions or Directions to get its last location.


Have the AirPods Pro‌ announce your calls

If you receive a call on your iPhone or Apple Watch when your Airpods Pro are connected, the ringtone will interrupt what you are listening to.

To find out who's calling, you usually have to take out the iPhone or look at your Apple Watch, but you can ask Siri to announce who's calling through the AirPods‌. And through: Settings - Phone or Phone - in the Calls section, click on the call announcement - then select Headphones Only.


Check battery life

You can check the charging status of your AirPods using the battery widget, but when you wear the AirPods, ask Siri, “How is my AirPods battery?” You will get an individual percentage for each speaker. And if you just open your charging case, you get a percentage like that.

You can also check the battery level of the AirPods through the Apple Watch, whether it is paired with the iPhone or the watch. To do this, swipe up on the watch face to bring up Control Center, then tap the battery icon, indicated by a percentage. Your AirPods' battery level will be displayed as a link below the battery percentage of the Apple Watch, and if you put the AirPod in its charging case, you will see the overall charge for all.


Reset or reset your AirPods Pro

If your AirPods are not working as they should be, or if you encounter any problem with them, you should, before anything, do a reset or reset.

Put your AirPods in the charging case and close the cover.

● Wait 30 seconds, then open the cover.

● On your iOS device, go to Settings - Bluetooth and tap the circled "i" next to your AirPods‌.

● Click on "Forget This Device" and confirm that.

With the AirPods case cover open, press and hold the button on the back of the case for about 15 seconds until you see the light flash yellow.

With the case cover open, place your AirPods close to your device and follow the steps on your device screen to reconnect your AirPods again.

Do you have any tips or tricks about AirPods‌ that we haven't mentioned? Tell us the comments below

Source:

macrumors

Related articles