The best way to clean the charging port of your iPhone

The connection ports in any smartphone are one of the places most likely to collect dust and dirt from the surrounding environment, and with the accumulation of dirt, the ports will not work efficiently, and with regard to the iPhone, we find that the Lightning connector is the most susceptible port to the accumulation of dust and dirt. And when it accumulates, the outlet does not do its work as it should, which leads some people to believe that there is some technical error regarding the device, and this pushes him to the necessity of visiting one of the centers Apple-approved maintenance. But the truth is that the problem is a simple solution, although you should deal with it with caution, so as not to damage the internal parts of the device, so in the following lines, we explain a number of ways to clean the charging port on your iPhone, and they have been arranged according to the extent The effectiveness of each method.

Use of compressed air

Using compressed air to clean the charging port on your iPhone is the safest and most effective way.

If you have access to a canister of compressed air, use the package straight across from the charging port, as this prevents the compressed air from turning into a liquid inside the package.

On the other hand, you must maintain an appropriate distance between the package and the Lightning port, the smaller the distance, the more air force, and the excessive force of the air can harm the port, and increasing the distance more than necessary, weakens the effect of air in cleaning the port optimally.

Use a thin tool

If you can't get a can of compressed air, you can use a thin tool to clean the Lightning port on your iPhone.

This method is very effective in removing hard objects that are stuck in the port and are difficult to move. However, two important factors must be taken into consideration.

Handle with great care while removing those solid objects stuck inside the port, so as not to damage the connectors of the port due to continuous abrasion.

Use a thin tool made of a non-metallic material, such as a toothpick made of plastic or wood, to avoid electrocution while cleaning the port.

Use a thin tool with alcohol

As previously mentioned, the method of using the thin tool is very effective in removing solid objects stuck in the Lightning port, but it will not be effective in removing dust and dirt.

However, it can be used with a small piece of cotton dampened with alcohol. This method is effective in removing dirt and dust, and gives great results. However, it should be noted here to avoid using ethyl alcohol to clean the port, as ethyl alcohol can cause great damage to the internal parts of the lightning outlet. Isopropyl alcohol is recommended.

Go to an approved center

It should be borne in mind that each method has its potential risks in the event of misuse. So that all the previous methods, despite their effectiveness, but their success depends mainly on dealing with caution with the ports of the iPhone device.

Nevertheless, the easiest solution can be resorted to through a simple visit to one of the training centers approved by Apple, to those accredited centers trained cadres specialized in dealing with Apple devices, and then, this method reduces the risks of misuse at a minimum, in addition to that in the case of Something went wrong while cleaning, maintenance center will be responsible for fixing it 😂.

Source:

idropnews