The sound of the iPhone-phone does not work as required, or that the headset does not emit a sound at all, a problem that some may face, but do not worry, in this article we will review together some methods and tricks that may contribute, God willing, to solve this problem.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions

Note: The methods that we will mention in this article may be somewhat rudimentary, but they had to be brought up because some overlook them, and it is not correct to address the complex methods that require disassembling the phone and so on so as not to cause any damage to the phone of any of the followers.


Hardware and software problems related to the sound of the iPhone headset

The sound of the iPhone headphone could be caused by a software problem or a problem with the device related to the software of the device, as well as the problem could be related to the hardware, and since we cannot confirm the type of problem with your phone, we will start with troubleshooting steps. Whether at the hardware or software level.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions


First: Problems and solutions related to the software

Did you activate silent mode in your phone?

It is possible that you set your phone to silent mode and forgot it, for example, in this case it should not affect the music, but it will affect the volume of the call alert on your phone, the loudspeaker will not make any noise when you receive a notification or a call on your phone and therefore you must make sure of Drag the Ring / Silent key above the volume buttons towards the screen:

Is the sound of the iPhone headphone not working as it should? Try these simple solutions

If the buttons do not change anything, go to Settings, then choose Sounds & Haptics, then check whether the change is triggered, and here you can change the volume through the Control Center by swiping and raising it to the maximum volume.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions

There is also an option to limit the maximum volume along with the toggle switch. To set this, you only need to go to Settings, Music or Music, and here you choose the volume limit, and here you can set the maximum volume possible.


Is your phone connected to Bluetooth with another device?

There may not be a problem with the speakers at all, for example, you may be connected instead to another device via Bluetooth, and to verify this, you only need to go to the bluetooth in your phone and check whether it works and is connected to another device or not, and then turn off the bluetooth to disconnect the amplifier Caller Voice.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions


Did you enable do not disturb mode on your phone?

"Do not disturb" mode stops interruptions while you are busy with the phone or sleeping and by activating this mode, notifications do not appear and calls do not ring, so you must verify that you did not turn it on or perhaps you activated it and forgot to turn it off, and to verify this, you only need to go to the settings or Settings and then choose Do Not Disturb. Here, my friend, you must make sure that this mode is disabled.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions


Is your iPhone updated to the latest version of iOS?

You may have an old version installed from the iOS system, although this should not cause audio complications, but it is always useful to update your phone to solve potential problems, and to check for updates, you only need to go to Settings or Settings and then choose General or General and finally Click Software Update to see if a new iOS version is available.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions


Second: Problems and solutions related to hardware

You do not need to worry if one of the above solutions does not solve your volume problem, this does not necessarily mean that you have to make an appointment with the maintenance center, but the problem may be simple and you can solve it yourself, and the simplest problem is the presence of dirt on the headphone outlet, this is likely to damage the level The sound of the phone, so my advice to you is to clean this outlet well and we have previously indicated how to properly clean it in Next article.

Is the sound of the iPhone headphone not working as it should? Try these simple solutions

If you have tried all the previous methods on your phone and it did not work with you, then in this case, my friend, there will be a problem with the speaker itself, and therefore you need to go to a maintenance center because opening the phone at home would be a great risk, especially if you do not have a background about these matters.

Tell us in the comments, were you experiencing this problem? Was it resolved or went to a maintenance center? Do you suggest other good and simple solutions?

Source:

makerof | payetteforward

Related articles