Sometimes, users encounter IPhone Connection failure problem, this means that they will not be able to make or receive any calls and the reason may lie in your cellular network and carrier or in the iPhone itself, and if you are facing this problem, continue reading the article to learn 6 ways to fix the connection failure problem in The iPhone.
contact another ball
The first and easiest thing you should do is try to make the call again, because often the call may fail due to a slight network outage and after seconds or even a minute, you will find that the problem has disappeared and you can make the call via the iPhone, but if the problem persists And it lasted for a longer time, then you will have to try the following methods in order to solve the problem of failure or inability to connect on the iPhone.
One of the most common reasons that lead to call failure is due to a malfunction in your cellular connection, meaning there is a problem receiving the signal coming from the cell towers, and this problem is temporary, and you can fix it easily by turning on the flight mode and then disabling it as follows:
- Go to settings on the iPhone
- Turn on flight mode
- You need to wait about 30 seconds
- Disable flight mode
Now, try making your call again, if it doesn't work, move on to the next method.
The problem of the inability to make and receive calls on the iPhone may be because of where you are, you may be in a place with a weak signal that appears and disappears (fake signal) where your device thinks that there is cellular coverage and you can see a bar or two in your signal strength and when you try Make a call it fails, so try to change your location and move to another place and try the connection, it might work and if it is the opposite, it's time for the never-fail method.
Reboot the iPhone
Sometimes, the solution to the problem is to restart the iPhone because the problem may be caused by the operating system, so try to turn off the iPhone and wait a minute and then turn the device back on. This step can restart some system components that were blocking calls due to an error.
It is possible that there is a problem with the SIM card, it may be damaged and need to be replaced or because of its size that does not fit in its tray, in the first case, go to your carrier to get a new one and in the second case, you need to take out the card carefully and then Try to put it back properly and then try to connect.
If all previous attempts failed, then maybe it is time to reset network settings and this method is a last resort because using it means erasing all network settings including Wi-Fi passwords, cellular settings and paired devices. connection, here are the steps to reset network settings:
- Go to Settings, then General
- Then move or reset the iPhone
- Press Reset
- And select Reset Network Settings